Chery QQ6 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
1. Principle of Fog Lamp Control
The fog lamp is controlled by the combination light switch which is used to control the open/close
of the fog lamp relay. When the light switch is turned to the clearance lamp position, the electric
power from the fuse F4 is supplied to the fog lamp switch via the angle 7#. When the fog lamp
switch is in the front fog lamp position, the 3# terminal of the fog lamp switch is successfully
connected to the 2# terminal to make the front fog lamp relay engaged and thus light up the front
fog lamp. When the fog lamp switch is in the rear fog lamp position, all terminals 3#, 2# and 9# of
the fog lamp switch turn on, and the rear fog lamp relay also engages. In this case, the front and
rear fog lamps light at the same time. So, the principle of the fog lamp control is just to turn on the
clearance lamp (position lamp) and then turn on the front fog lamp, and the rear fog lamp can be
turned on only after the front fog lamp turns on (this is implemented using the switch).
Terminal
Light
Control
Switch
Rear Right Tail Lamp
Right Clearance Lamp
License Plate Lamp
Front
Fog
Lamp
To
Instrument
Rear Fog Lamp Relay
To
Instrument
OFF
Headlamp
Power
Clearance
Lamp
15a
Ka
30a
15
30
To
Each
Night
Light
Switch
Power
Left Clearance Lamp
Rear Left Tail Lamp
Front Right Fog Lamp
Front Left Fog Lamp
Rear Right Fog Lamp
Rear Left Fog Lamp
Clearance
Lamp
Headlamp
Front Fog Lamp Relay
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comments to this Manuals

No comments