Chery QQ6 Service Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
not return. Check if the oil pressure occurs
immediately.
No Repair and replace
fuel injector and
oil pipe
Yes Repair or replace
oil intake pipe
13 Check if there is leaking or jam in oil intake
pipe.
No Replace oil pump
Yes Repair or replace
oil return pipe
14 Check if the oil return pipe is bended or
jammed.
No Replace fuel
pressure regulator
Yes Next step 15 Put the ignition switch to ON. Check if
voltage on the following pins of ECU is normal:
if it is a battery voltage around 12V on 12#, 14#,
15# pins; if the voltage between 51#, 53#, 3#,
61#, 80# pins and the wire is zero.
No Repair or replace
cable
Yes Replace ECU 16 Check if ignition coil, ignition cable and spark
plug are normal.
No Adjust or replace
the parts involved
Note: This phenomenon indicates a comparatively obvious failure and some minute
details, such as if strainer of the system or exhaust pipe is blocked and so forth, should
also be checked. For other causes, check spark plug and ignition cable etc.
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 84 85

Comments to this Manuals

No comments