Chery TRITEC1.6L Specifications download pdf (Page 130)

Maintenance and Upkeep

- 124 -

The engine will work unsteadily and

the components wll even be damaged

if the spark plugs are installed not

properly or spark plugs of any other

else brands are installed. In order to

avoid engine and other components

being damaged, the following tips

should be observed: 1. Tighten the

spark plugs according to standard

torque, do not let it too tight, it will

damage the cylinder head thread if

you let it too tight. 2. While

removing or tightening the spark

plugs, make the sockets aligned with

the spark plugs rightly. 3. Install the

plugs in the engine and run them by

hand at first. 4. Loosen the plugs

through pulling them, instead of

using high-tension line. 5. Do not use

spark plugs of any other else brands.

6. Do not pollute the spark plug hole.

7. Pay attention to the safety, while

the engine is hot, the spark plugs are

hot, but you want to remove the

plugs.

Drive belt

Correct installation and suitable

tension of drive belt can ensure

normal working of engine, air

conditioning and other performance.

Please replace the drive belt as soon

as possible, if it is worn, cracked or

inflated.

In order to check tension of drive belt,

press the middle of pulley properly

with your thumb to see whether or

not the displacement of belt is about

10mm. If the belt is too loose, please

have it adjusted and repaired by the

nearest Chery Authorized Service

Station.

！Notice

Be sure not to start the engine while

checking the belt, otherwise it will

cause moving parts squeezed,

separated or twisted together. It may

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 162 163

Comments to this Manuals

No comments