Chery QQ6 Service Manual download pdf (Page 60)

Instrument Panel

60

The method to adjust the

clock display is as

follows:

Press the clock adjustment button on the

vehicle instrument to adjust the right area

of LCD display to the clock display

mode. In this case, press the clock

adjustment button and keep it for

approximate 4 s. And the HOUR digit of

the digital clock will frequently flash.

Press the clock adjustment button to

adjust the hour digit of the clock, with

one hour increament every one press.

Pressing the button for a long time will

automatically increase the value of

HOUR digit; after the completion of

HOUR digit adjustmenet, about 6 s later,

the MIN digit of the digital clock will

automatically flash. In this case, press the

clock adjustment button to adjust the

MIN digit of the clock, with one minute

increament every one press. And pressing

this button for a long time will

automatically increase the value of MIN

digit.

After the completion of time adjustment

of the clock, several seconds later, the

digital clock doesn’t flash any more. It

indicates that the time of clock is

corrected.

Tachometer

It is used to display the engine speed

(rpm).

The red area in the upper right side of the

dial represents the highest allowable

speed range that the engine can get in a

short period of time under the operating

temperature of the engine after its

running-in.

However, it is recommended to push the

shift control rod into the next higher gear

or remove your leg from the accelerator

pedal when the needle reaches this zone.

NOTICE:

Entering into the next higher gear early is

favorable to save fuel and decrease the

driving noise.

Once you find the engine operates

unsteadily, please immediately shift the

control rod into the next lower gear.

During the running-in period,

DO NOT let the engine

operate at high speed!

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 168 169

Comments to this Manuals

No comments