Chery QQ6 Service Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
pressure difference between the inlet and the outlet of the canister control valve. The canister control
valve will be closed when there is not any electric pulse.
12.4 Installation attentions
See above installation drawing for connection among canister control valve, carbon canister and
intake manifold.
l In order to avoid transfer of solid borne noise, floating installation of the canister control valve
on the hose is recommended.
l During installation, make sure that the airflow direction meets the specification.
l Appropriate measures such as filtering and purge etc. must be taken to prevent such foreign
material as particles from entry into the canister control valve from carbon canister or hose.
It is recommended that a corresponding protective strainer (size of grid<50µm) should be
installed on outlet of carbon canister.
12.5. Failure effects and judgment method
l Failure effects: Failure of functions etc.
Reasons for general failure: corrosion or poor sealing performance etc. due to entry of foreign
material into inside of the valve.
l Maintenance precautions:
1. During installation, make sure that the airflow direction meets the specification;
2. In case of control valve failure due to black particle inside the valve body, when replacement
of the control valve is required, check the status of the canister;
3. During maintenance, try to avoid entry of such liquid as water and oil etc. into the valve;
4. In order to avoid transfer of solid borne noise, floating installation of the canister control
valve on the hose is recommended.
87# pin of main relay
C
anister control valve
1 From fuel tank
2 Canister
3 Atmosphere
4 Canister control valve
5 To intake manifold
6 Throttle
Cross-section view of
canister control valve
Installation drawing of canister control valve
ΔP
is the difference between environmental pressure
Pu and intake manifold pressure Ps
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 84 85

Comments to this Manuals

No comments