Chery QQ Service Manual download pdf (Page 25)

II. Overhaul of Compressor

Inside of the compressor are assembled with highly machined fine parts, in case abnormal noise or

internal failure is found, replace the assembly.

III. Installation procedure

For the installation order, please refer to the disassembly order, and then follow the order adverse

to that for disassembly to install. It should be noted that, when installing the A/C pipeline joint on

the compressor, be sure to replace with a new gasket and tight the joint at specified torque to avoid

leak.

Chapter Seven Disassembly of Generator

I. Disassembly Procedure

1. Use a 10# sleeve to remove the connecting line of

battery.

2. Use a 10# sleeve to loosen the fixing bolt of generator

adjusting bracket, and then take off the adjusting bracket.

Torque: 30+5Nm.

Before disassembling the

generator, remove the connecting

line of battery first.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

No comments

Chery QQ Service Manual Page 25