Chery QQ Service Manual download pdf (Page 39)

II. Installation Procedure

1. Please follow the order adverse to that for disassembly to install, but care should be taken for

the following matters.

(1) When hoisting, do not install exhaust manifold first, because the longitudinal separation of

engine compartment is not big enough; otherwise, it may affect the assembly.

(2) After installation, please adjust the stroke of clutch pedal. When adjusting, adjust it to a proper

position according to the corresponding requirements, in case of a too big free stroke of clutch, it

may make sound when shifting gear or fail to release; while in case of a too small stroke, wear of

friction plate may be accelerated and travel weakness may occur, if severely, the friction plate may

be burnt out.

Chapter Ten Disassembly of Intake Manifold

I. Disassembly Procedure

1. Use an 8# sleeve to remove the four fixing bolts of

ignition coil and then remove such connections as

ignition cable/injection nozzle harness etc.

2 Use a 10# sleeve to remove the bolt of intake manifold

fixing bracket.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

No comments

Chery QQ Service Manual Page 39