Chery QQ Service Manual download pdf (Page 26)

3. Use a 13# sleeve to remove lower fixing bolt of the

generator.

Torque: 40+5Nm.

4. Use a 10# sleeve to remove the fixing bolt of generator

anode harness, pull out the harness connector, remove the

belt and then take out the generator.

II. Overhaul of Generator

In case the generator makes abnormal noise or its yield is too high or too low, replace the

assembly.

III. Installation Procedure

The installation order of the generator is adverse to that for its disassembly. After the generator is

installed, adjust deflection of the belt.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 57 58

No comments

Chery QQ Service Manual Page 26