Chery QQ Service Manual download pdf (Page 51)

2. Completely and softly shovel off the glue on the surface

of oil pan with a flat shovel and then apply new sealant

uniformly (see the table above for type of the sealant).

Note:

As soon as new sealant is applied properly,

assemble at once; otherwise, the sealant may freeze,

which may affect the sealing effect.

Chapter Thirteen Disassembly of Crank-Connecting Rod

Mechanism

I. Disassembly Procedure

1 Use a 13# sleeve to remove the fixing bolt of clutch

cover.

Torque: 23±2 Nm

2. Use the special tool CH-20009 to lock the crankshaft

and then use a 13# sleeve to remove the connecting bolt

of flywheel and crankshaft.

3. Use a 13# sleeve to loosen the fixing bolt of

connecting rod bearing cylinder by cylinder and then

take off the piston and connecting rod assembly.

Note:

After the pistons are taken out of the cylinders,

reset and connect the bearing caps of connecting rod big

end and bolts properly and then put them by order.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

No comments

Chery QQ Service Manual Page 51