Chery QQ6 Service Manual download pdf (Page 23)

23

Steering Wheel Lock &

Ignition Switch

The built-up type steering wheel

lock/ignition switch includes the

following key positions:

B--the ignition switch is turned off, and

the steering wheel is locked.

When the key is drawn out from the

ignition switch, the steering wheel lock

will be activated to lock up the steering

wheel.

To lock the steering wheel, after

removing the lock, the steering wheel

shall be turned slightly until you hear

the engage sound of steering wheel

locking.

I -- Steering system unlocked. The

circuits of electrical accessories are

switched on to operate the audio,

cigarette lighter, wiper and other

electric appliances. But the ignition

switch and primary electrical circuits

power off.

If it fails or is difficult to turn the key

from the LOCK position to this

position, you can slightly turn the

steering wheel to the left and right, and

then the steering wheel locking

mechanism will be able to release.

The key of ignition switch shall not be

placed this position for a long time to

avoid using up the power of battery.

II – Switch on the ignition circuit to

enable all electrical circuits to work.

Both warning lamp and indicator light.

This is the proper position of key

during driving, and also is the position

that must be selected when the vehicle

is trailed.

III – To switch on the starting motor,

and start up the engine.

When the locking hole is in this

position, the wiper, audio and other

electrical apparatuses with large

electric power consumption all be

switched off to ensure the vehicle starts

up.

There is a restart proofing equipment

inside the ignition switch. Once the

engine operates, this equipment can

prevent the starter from false startup to

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 168 169

Comments to this Manuals

No comments