Chery TRITEC1.6L Specifications download pdf (Page 71)

13 9

14 0

620

Plastic wheel trims: The plastic wheel

trims are easily damaged by organism.

In case of any organism spattering on

the trim, do wipe it away by clean water

and check if the trim is damaged.

Aluminum-quality wheel: Only use

neutral suds or neutral cleaning

solutions.

Plastic bumper: Take care of cleaning

the bumper. No wiping it with cleaning

solution containing abrasive.

Asphaltum: Clean it by turpentine or the

cleanser labeled no harm to the paint.

Warning

No using organism (petrol, kerosene,

naphtha or strong dissolvent);

otherwise, poisoning or damage will

be caused.

3. Wash away the suds completely;

otherwise, it will become speckles

when it is dry. In case of cleaning in

summer, clean each part with clean

water correctly.

4. Use a clean soft towel to dry the vehicle

body to avoid water marks. Do not wipe or

press the vehicle forcefully; otherwise

the paint surface will be damaged.

Waxing of LF620

Polishing and waxing for the vehicle

body is recommended for maintaining

a shining outlook of the vehicle.

A waxing should be implemented for

once each month or anytime when the

vehicle surface can not be well

water-resistant.

1. Before waxing, do wash the vehicle

first and dry its body, even if using the

compound of cleanser and car wax.

2. Use high-quality polish agent and car

wax. In case that the car polishing has

seriously effloresced, use the cleaning

polish agent separately from waxing.

Follow the instructions and precaution

measures from the manufacturer carefully;

the chrome plating and paint surface

both need polishing and waxing too.

3. Redo the waxing in case that water does

not form beads and still retains on a large

contact surface.

Note

In case redoing the waxing and parking

the vehicle in a painting workroom at high

temperature, take off the plastic bumper;

otherwise, it will be damaged due to

the high temperature.

Inner Cleaning

Do not use clean water. And keep the carpet

dry as possibly as you can. Read the

instructions for cleaning solutions and

follow them strictly.

Note

Do not clean the inner floor by water or

make water flow into the floor when

cleaning the inner or outer vehicle. Water

may enter the carpet (or mat) or the

acoustics components or other electrical

components on and below the carpet

and cause a malfunction, and even result

in corrosion on the vehicle.

Carpet

Clean the carpet with high-quality foam

cleaning solution.

Use a dust collector to wipe away the dust

possibly. There is various foam cleaning

solutions for use. Some is stored in an

aerosol can; others are powder or fluids

which produce foams when mixed with

water. Clean the carpet by a sponge or

brush immersed with foams. Wipe it in a

circle way.

Safety belt

The safety belt can be cleaned by neutral

suds or lukewarm water.

Use sponge or soft cloth for cleaning. Do

check if the belt is excessively worn,

frazzled or has shear mark.

Note

●The safety belt should not be cleaned

by a staining agent or bleaching agent

which will weaken the strength of the

belt.

●No using the belt before it is dry.

Door and window

The door and window can be cleaned

by any cleanser for home- use.

Note

Take care not to scratch or damage

the heating wire or connectors when

cleaning the inside of rear window.

A/C contro l plate, acoustic s, dashboard,

contro l plate and switc h

To clean them with a moist soft cloth.

Moisten a clean soft cloth in water or

lukewarm water, and then wipe away

the dust lightly.

Instru cti on Manual of Lifan Sedan

LIFAN

Instru cti on Manual of Lifan Sedan

LIFAN

Chongqing Lifan Passenger Vehicle Co., Ltd.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 87 88

Comments to this Manuals

No comments

Chery TRITEC1.6L Specifications Page 71

Comments to this Manuals

Related products and manuals for Cars Chery TRITEC1.6L